CEILING MOUNTED BASKETBALL STRUCTURE
Product no. 4-01
The construction mounted to the roof girders, folds forward and backward with an electric drive. The supporting structure consists of welded lattices which are made of closed steel profiles, knuckle joined in such a way so the construction stays stable during dynamic strains and still provides the ability to fold forward and backward.The construction is always individually adapted to the object.
The lifting of the construction is based on an electric drive ( Somfy type tubular engine with power of 450W ) that is being set in motion by two-leveled switch or by a remote control. There is a possibility to provide a synchronized system for all of the sport devices which are electrical controlled ( one remote for all devices in different configurations ). The system of steel wires is winded onto the engine drum and that allows to fold and unfold the construction. After the unfolding the backboard is being set in a vertical position and the ring in the height of 3,05 m. If the construction has the height adjustment mechanism between 2,6 m to 3,05 m, the backboard construction with the ring can be regulated in this range as well, not depending on the carrying construction of the structure.
The carrying beams are made of 120x80x3 mm steel profiles, the vertical frame 80x40x2 mm profile along withe the braces of 30x30x2 mm profile. The tilting frames are made of 40x40x2 mm profiles along with the braces of 30x30x2 mm profiles. All of the elements are made of powder painted S235 steel type. The steel wires with thickness of 4 mm are winded onto the engine. The Somfy engines LT60 Taurus, the length of complete drive 705 mm to the octagonal fi 70 mm tube, power 230V/50Hz. The rotating moment 120 Nm, speed 12 rotations/min., power take 450W, the protection level IP44. The beam - frame connectors are made of sheet metal (thickness 8 mm), joined by fi 20 mm bolts. This construction has the Polish Basketball Association Certificate.
VERTICALLY LIFTED BASKETBALL STRUCTURE 200 CM
Product no. 4-02
The basketball construction vertically lifted with the electric drive, wall or post mounted, outreach up to 200 cm. The construction is made of steel profiles 40x40x2 mm and 30x30x2 mm.The fixing structure is made of closed profiles 60x40x2 mm, the fixing steel plates have thickness of 8 and 5 mm. All of the steel elements are made of S235 steel type and are powder painted. The steel wires ( thickness 4 mm ) are winded onto the engine.
The Somfy LT 60 Taurus engine, the complete length of the drive 705 mm, to the octagonal tube with fi 70 mm, the power 230V/50Hz, the rotating moment 120Nm, the speed 12 rotatings/ minute, power take 450 W, protection level IP44.
VERTICALLY LIFTED BASKETBALL STRUCTURE 200-400 CM
Product no. 4-03
The basketball construction vertically lifted with the electric drive, wall or post mounted, outreach 200 - 400 cm. The construction is made of steel profiles 40x40x2 mm and 30x30x2 mm.The fixing structure is made of closed profiles 60x40x2 mm, the fixing steel plates have thickness of 8 and 5 mm. All of the steel elements are made of S235 steel type and are powder painted. The steel wires ( thickness 4 mm ) are winded onto the engine.
The Somfy LT 60 Taurus engine, the complete length of the drive 705 mm, to the octagonal tube with fi 70 mm, the power 230V/50Hz, the rotating moment 120Nm, the speed 12 rotatings/ minute, power take 450 W, protection level IP44.
VERTICALLY LIFTED BASKETBALL STRUCTURE 200-400 CM
Product no. 4-03
The basketball construction vertically lifted with the electric drive, wall or post mounted, outreach 200 - 400 cm. The construction is made of steel profiles 40x40x2 mm and 30x30x2 mm.The fixing structure is made of closed profiles 60x40x2 mm, the fixing steel plates have thickness of 8 and 5 mm. All of the steel elements are made of S235 steel type and are powder painted. The steel wires ( thickness 4 mm ) are winded onto the engine.
The Somfy LT 60 Taurus engine, the complete length of the drive 705 mm, to the octagonal tube with fi 70 mm, the power 230V/50Hz, the rotating moment 120Nm, the speed 12 rotatings/ minute, power take 450 W, protection level IP44.
VERTICALLY LIFTED BASKETBALL STRUCTURE 400-550 CM
Product no. 4-04
The basketball construction vertically lifted with the electric drive, wall or post mounted, outreach 200 - 400 cm. The construction is made of steel profiles 40x40x2 mm and 30x30x2 mm.The fixing structure is made of closed profiles 60x40x2 mm, the fixing steel plates have thickness of 8 and 5 mm. All of the steel elements are made of S235 steel type and are powder painted. The steel wires ( thickness 4 mm ) are winded onto the engine.
The Somfy LT 60 Taurus engine, the complete length of the drive 705 mm, to the octagonal tube with fi 70 mm, the power 230V/50Hz, the rotating moment 120Nm, the speed 12 rotatings/ minute, power take 450 W, protection level IP44.
STABLE BASKETBALL CONSTRUCTION
Product no. 4-05
Stable basketball construction, 120cm outreach, powder painted. Mounted directly to the wall or post. Mounting to the reinforced concrete wall by using the steel stretcher anchor bolt M12. The mounting to the slit brick is by using the steel anchor bolts M12 fixed to the chemical anchor (polyester anchor mass). The wall frame is made of closed profiles 60x40x2 mm according to the PN-EN 10219 norm, the tilting frames are made of closed profiles 40x40x2 mm according to the mentioned norm as well.
This construction is for indoor and outdooruse. All kinds of backboards and rings can be fixed to it. The construction canbe equipped with a mechanism of height adjustment in range between 2,6 m( junior ) and 3,05 ( senior ).
WALL-TILTING BASKETBALL CONSTRUCTION 100-180 CM
Product no. 4-06
The tilted construction folds sideways to the wall, the outreach is from 100 cm to 180 cm, mounted directly to the wall or post. Mounting to the reinforced concrete wall by using the steel stretcher anchor bolt M12. The mounting to the slit brick is by using the steel anchor bolts M12 fixed to the chemical anchor ( polyester anchor mass ). The articulated system provides the possibility of vertical folding of the construction by using the handles. Pulling the handle down releases the lock, the other handle, placed in the opposite frame provides the ability for folding/unfolding of the construction.
Additional information
The articulated joining is made of pins ( fi 12 rod ), completed with a resilient axial lock.The wall frame is made of closed profiles 60x40x2 mm according to the PN-EN 10219 norm, the tilting frames are made of closed profiles 40x40x2 mm according to the above mentioned norm as well. The security/protection system has a form of a telescope. This construction is for indoor and outdoor use and can be adapted to all sorts of backboards and rings. It can be equipped with height adjustment mechanism in range 2,6 m ( junior ) and 3,05 m ( senior ). To fold/unfold the construction a special handle has to be used. This handle has to be placed in the security lock of the construction and by pulling the handle down the lock will be released - the handle has to be pulled so the construction folds in whole on to the wall.
https://www.youtube.com/watch?v=F6TsHxg4-6M
SUPPORTED TILTING BASKETBALL CONSTRUCTION 180-250 CM
Product no. 4-07
The supported tilting construction folds sideways to the wall, the outreach is from 180 cm to 250 cm, mounted directly to the wall or post. Mounting to the reinforced concrete wall by using the steel stretcher anchor bolt M12. The mounting to the slit brick is by using the steel anchor bolts M12 fixed to the chemical anchor ( polyester anchor mass ). The articulated system provides the possibility of vertical folding of the construction by using the handles. Pulling the handle down releases the lock, the other handle, placed in the opposite frame provides the ability for folding/unfolding of the construction.
The articulated joining is made of pins ( fi 12 rod ), completed with a resilient axial lock.The wall frame is made of closed profiles 60x40x2 mm according to the PN-EN 10219 norm, the tilting frames are made of closed profiles 40x40x2 mm according to the above mentioned norm as well. The security/protection system has a form of a telescope. This construction is for indoor and outdoor use and can be adapted to all sorts of backboards and rings. It can be equipped with height adjustment mechanism in range 2,6 m ( junior ) and 3,05 m ( senior ).To fold/unfold the construction a special handle has to be used. This handle has to be placed in the security lock of the construction and by pulling the handle down the lock will be released - the handle has to be pulled so the construction folds in whole on to the wall.
https://www.youtube.com/watch?v=F6TsHxg4-6M
SUPPORTED TILTING BASKETBALL CONSTRUCTION 250-400 CM
Product no. 4-08
The supported tilting construction folds sideways to the wall, the outreach is from 250 cm to 400 cm, mounted directly to the wall or post. Mounting to the reinforced concrete wall by using the steel stretcher anchor bolt M12. The mounting to the slit brick is by using the steel anchor bolts M12 fixed to the chemical anchor ( polyester anchor mass ). The articulated system provides the possibility of vertical folding of the construction by using the handles. Pulling the handle down releases the lock, the other handle, placed in the opposite frame provides the ability for folding/unfolding of the construction.
Additional information
The articulated joining is made of pins ( fi 12 rod ), completed with a resilient axial lock. Because of the outreach length the construction is additionally equipped with steel guy wires ( 4 mm thickness ) which are fixed to the frame mounted above the basketball. Placing it depends on exact length of the arm and mounting possibilities in the facility. The wall frame and the guy wires frame are made of closed profiles 60x40x2 mm according to the PN-EN 10219 norm. The tilting frames are made of closed profiles 40x40x2 mm according to the mentioned norm as well. This construction is only for the indoor use. The security/protection system has a form of a telescope. This construction can be adapted to all sorts of backboards and rings. It can be equipped with height adjustment mechanism in range 2,6 m ( junior ) and 3,05 m ( senior ).To fold/unfold the construction a special handle has to be used. This handle has to be placed in the security lock of the construction and by pulling the handle down the lock will be released - the handle has to be pulled so the construction folds in whole on to the wall.
SUPPORTED TILTING BASKETBALL CONSTRUCTION 400-550 CM
Product no. 4-09
The supported tilting construction folds sideways to the wall, the outreach is from 400 to 550 cm, mounted directly to the wall or post. Mounting to the reinforced concrete wall by using the steel stretcher anchor bolt M12. The mounting to the slit brick is by using the steel anchor bolts M12 fixed to the chemical anchor ( polyester anchor mass ). The articulated system provides the possibility of vertical folding of the construction by using the handles. Pulling the handle down releases the lock, the other handle, placed in the opposite frame provides the ability for folding/unfolding of the construction.
Additional information
The articulated joining is made of pins ( fi 12 rod ), completed with a resilient axial lock. Because of the outreach length the construction is additionally equipped with steel guy wires ( 4 mm thickness ) which are fixed to the frame mounted above the basketball. Placing it depends on exact length of the arm and mounting possibilities in the facility. The wall frame and the guy wires frame are made of closed profiles 60x40x2 mm according to the PN-EN 10219 norm. The tilting frames are made of closed profiles 40x40x2 mm according to the mentioned norm as well. This construction is only for the indoor use. The security/protection system has a form of a telescope. This construction can be adapted to all sorts of backboards and rings. It can be equipped with height adjustment mechanism in range 2,6 m ( junior ) and 3,05 m ( senior ).To fold/unfold the construction a special handle has to be used. This handle has to be placed in the security lock of the construction and by pulling the handle down the lock will be released - the handle has to be pulled so the construction folds in whole on to the wall.
GYMNASTIC WALL-BAR BASKETBALL CONSTRUCTION
Basketball construction set which can be attached to the gymnastic wall-bar by the steel outreach. The backboard dimensions 90x120 cm, stable ring and net. The set is designed for an indoor play and training.
MOBILE BASKETBALL CONSTRUCTION 125 CM
Product no. 4-11
The mobile basketball construction with an outreach 125 cm. The height adjustment range from 200-260-305 cm, protection covers, rotating wheels, ballasts, back cover made of corrugated aluminium plate. This construction is for an indoor and outdoor use where the stable basketball construction cannot be provided. It is equipped with the smooth height adjustment mechanism in range 200 cm ( storage ), 260 cm ( junior basketball ) and 305 cm ( senior basketball ). To regulate the mechanism the trapeze screw TR 20 mm has to be used. It has additional blockades at each level of height ( 200, 260, 305 cm ).
The construction is equipped with "suitcase" balancer ( 8 pieces of ballasts, each with weight of 30 kg - made of stell flat bar 100x50 mm ), security hook which is being fixed to the ground ( floor cap ).
The front of the construction is protected by polyurethan foam with thickness of 5 cm on the plywood base, all is covered with a washable material called " skaden ". The back cover of the construction is made of corrugated aluminium plate with thickness of 3 mm, the part where the ballast are placed opens. The base of the construction is made of steel profiles 80x40x2 mm, the arm is made of 100x100x3 mm profile, the adjustable outreach is made of galvanized profile 90x90x3 mm 9 the rest of construction is powder painted ). The basketball frame dimensions : 1400x1116 mm. Full basketball dimensions in play position : 3090x1900x3973 mm ( including the backboard 105x180 cm ).The storage dimensions: 2600x1900x3066 mm ( including the backboard 105x180 cm ). The construction is mobile because of wheels: rotating wheel fi 80, polyamide paste, grey polyurethan treadmill, roller bearing and wheel fi 100 with roller bearing. This solution for wheels allows the use of basketball construction on different kinds of sport floors. All kinds of backboards and rings can be fixed to this construction.
Mounting the construction to the ground: Transport in the storage position ( 200 cm ) to the required place, by gripping for the ring tilt the construction your way to allow the wheels freely move the basketball construction. Place the construction in such a way that the back hook is in the axis of ground mounting. By using the key release 4 footers on to the ground ( so it is slightly above the ground ). Next, hook the chain and block the construction with the butterfly nut. Open the back cover, place 8 ballasts ( "suitcases" ) and close it.
Adjusting the height: Untwist the locking winder, take out the safety pin, place the key in the regulating screw. The key allows to adjust the height - 200 cm storage, 260 cm junior and 305 senior. After adjusting the required height, block the winders and put the safety pin back.