Playspec
$1.00
“Perfect for playgrounds”
IAE offer two standard designs of Playspec®Fencing, with either a bow or flat top. Both are designed to meet the requirements of BS EN 1176 Playground Equipment Specification, with gaps not exceeding 89mm and free from any neck entrapments.Two heights are available from stock, either 1 or 1.2 metre, with a 12mm or 16mm diameter infill. Posts are 50 x 50 box section, set at 2.8 metre centres. Special panels manufactured in a non-standard length, curved or raked can also be produced to suit individual requirements.IAE Playspec® is stocked in a hot dip galvanised finish but can be polyester powder coated to one of a comprehensive range of colours to suit a playground environment
Features:
- Standard heights available from stock
- Compliant with BS EN 1176
- Security fixings
- Stepping cleats
- Hot Dip Galvanised to BS EN ISO 1461
- Polyester Powder Coating (optional)
Suitable for:
- Playgrounds
- Theme Parks
- Parks
Panels:
- Height :1000mm & 1200mm
- Diameter Infill: 12mm & 16mm option for both hights
- Bow Spacing :96mm
- Panel Width : 2720mm
Posts:
- Post size : 50x50 SHS
- Post Centres 2800mm
FINISH
Hot Dip Galvanised to BS EN ISO 1461 (as standard).Additional Polyester Powder Coating to BS 1722 Pt.16 if required.
Polyester Powder Coating is available in a range of colours.
Prosafe
$1.00
"Safe self-closing”
IAE’s Prosafe® Hydraulic Self Closing Gate is manufactured to comply with BS EN 1176 Playground Equipment Specification, making it free from finger traps, crush points and shear actions that could cause injury.The Prosafe® Gate has a built in hydraulic unit, which is fully shielded to prevent vandalism. This mechanism makes the IAE Prosafe® virtually impossible to slam shut and prevents it from bouncing back when pushed hard. It has an anti-trap mechanism and cannot swing beyond its stop point. The gate is adjustable and can be set to conform with ROSPA’s recommendations.Two heights are available from stock, either 1 or 1.2 metre. Gates are hot dip galvanised to BS EN ISO 1461 as standard and polyester powder coated yellow RAL 1021. Other colours are available on request.
Features:
- Available from stock
- Hydraulic self closing mechanism
- Anti-finger trap
- Controlled gate flow
- Easily adjustable
- Hot Dip Galvanised to BS EN ISO 1461
- Polyester Powder Coating (optional)
Suitable for:
- Playgrounds
- Theme
- ParksParks
FINISH
Hot Dip Galvanised to BS EN ISO 1461 (as standard).Additional Polyester Powder Coating to BS 1722 Pt.16 if required.
Polyester Powder Coating is available in a range of colours.
"Prosafe Combination Gate"
$1.00
"Prosafe Combination Gate"
The Prosafe® double leaf combination gate is also available from stock. These gates measure 2780mm from centre to centre of post and allow both pedestrian and vehicular access. The pedestrian leaf is 1100mm wide and has a Prosafe® closer, whilst the larger leaf is manually operated and can be secured in the open and closed positions with a lockable drop-bolt. Matching maintenance gates are also available on a made to order basis. These gates do not have a self-closing mechanism but come with a lockable drop-bolt and slide latch as standard.
Features:
- Available from stock
- Hydraulic self closing mechanism
- Anti-finger trap
- Controlled gate flow
- Easily adjustable
- Hot Dip Galvanised to BS EN ISO 1461
- Polyester Powder Coating (optional)
Suitable for:
- Playgrounds
- Theme
- ParksParks
FINISH
Hot Dip Galvanised to BS EN ISO 1461 (as standard).Additional Polyester Powder Coating to BS 1722 Pt.16 if required.
Polyester Powder Coating is available in a range of colours.
"Pedestrian Guardrail"
$1.00
“Pedestrian protection”
Designed to protect adults and children at road junctions and crossings. Pedestrian guardrails also make excellent boundary fences within school grounds, car parks or sporting facilities. Standard panels are 2 metres long and manufactured in compliance with BS 7818 with either 12 or 16mm diameter infill bars set at 110mm centres. Non-standard length, raked or curved panels can also be manufactured to suit special requirements.
Features:
- PG1 & PG2 available from stock
- Compliant with BS 7818
- Hot Dip Galvanised to BS EN ISO 1461
- Polyester Powder Coating (optional)
- Base plated option
Suitable for:
- Roadsides and Junctions
- School Car Parks
- Spectator Barriers
Pedestrian Guardrail Specification:
PANELS
- Height : 900mm actual panel (leg 1350mm o/all)
- Panel infill : 12mm PG Standard or 16mm PG-B
- Bar Spacing : 110mm
- Panel Width : 2000mm
FINISH
Hot Dip Galvanised to BS EN ISO 1461 (as standard).Additional Polyester Powder Coating to BS 1722 Pt.16 if required.Polyester Powder Coating is available in a range of colours.
"Vmex"
$1.00
“Cost effective perimeter fencing”
The Vmex®mesh system is IAE’s most cost effective perimeter fence, providing a highly economical option for low to medium security applications. Despite its budget price point Vmex® still sports heavy gauge 6mm horizontal and 5mm vertical wires, forming mesh apertures of 200mm x 50mm. Three pressed beams provide rigidity, whilst the shallow nature of these ‘V’ beams prevents them being used as a climbing aid. Vertical wires are extended by 30mm forming a ‘spiked’ top to the panels further discouraging intruders from attempting to scale the fence.Vmex® panels are supported by strong 60 x 60 steel box section posts, which are supplied with steel fixing clips & M8 security screws.
Features:
- Compliant to BS 1722 Pt. 14
- Available from stock
- Base-plated post option from stock
- M8 Security fixingsAnti-climb shallow ‘V’ profile
- Choice of RAL colours available
Suitable for:
- Schools, Colleges & Universities
- Commercial Premises
- Industrial Units
- Solar Farms
PANELS
- Heights : 1200, 1800, 2000, 2400 & 3000mm
- Wire Diameter : 5mm verticals & 6mm horizontals
- Aperture Size : 200 x 50mm
- Panel Width : 3005mm (1200 – 2400mm high), 2805mm (3000mm high)
POSTS
Post Size : 60 x 60 SHS
Post Centres : 3030mm (1200 – 2400mm high), 2830mm (3000mm high)
FINISH
Galvanised and Polyester Powder Coated to BS 1722 Pt. 16.
Gates Available
"Zebex"
$1.00
"Style and security”
Zebex® is a strong, stylish fence, combining excellent aesthetic appeal with anti-climb properties.The stylish stripe effect design combines 6mm (horizontal) and 4mm (vertical) wires to form narrow apertures 22mm – 40mm wide. Reducing the risk of both climbing and cutting. Three pressed beams provide rigidity, whilst the shallow nature of these ‘V’ beams prevents them from being used as a climbing aid.Zebex® panels are supported by strong 60 x 60 steel box section posts, which are supplied with steel fixing clips & M8 security screws.An attractive design and inherent security properties mean that Zebex® is suitable for a wide range of perimeter applications.
Features:
- Compliant to BS 1722 Pt. 14
- Available from stockBase-plated post option from stockM8 Security fixings
- Anti-climb shallow ‘V’ profile
- Choice of RAL colours available
Suitable for:
- Distribution CentresSchool,
- Colleges & Universities
- Commercial Premises
- Industrial Units
PANELS
Heights : 2000, 2400 & 3000mm*
Wire Diameter : 4mm verticals & 6mm horizontals
Aperture Size : 150 x 40mm / 150 x 22mm
Panel Width : 3044mm
*Double lift system
POSTS
- Post Size : 60 x 60 SHS
- Post Centres : 3070mm
FINISH
Galvanised and Polyester Powder Coated to BS 1722 Pt. 16
*Gates Available
"Zebex Gates"
$1.00
Gates
The IAE Zebex®system can be complimented with single or double leaf gates, some of which are held in stock for immediate delivery. A heavy duty pad-lockable sliding latch and drop bolts are fitted as standard with other locking options being available on request. Stock gate widths available are as follows.
Features:
- Compliant to BS 1722 Pt. 14
- Available from stock
- Base-plated post option from stockM8 Security fixings
- Anti-climb shallow ‘V’ profile
- Choice of RAL colours available
Suitable for:
- Distribution Centres
- School, Colleges & Universities
- Commercial Premises
- Industrial Units
PANELS
- Heights : 2000, 2400 & 3000mm*
- Wire Diameter : 4mm verticals & 6mm horizontals
- Aperture Size : 150 x 40mm / 150 x 22mm
- Panel Width : 3044mm
"Duex Perimeter"
$1.00
“Rigid perimeter mesh system”
Duex® double wire mesh is traditionally used in a sports environment, but its rigid construction makes it equally as effective for perimeter protection and demarcation. The inherent strength within the panels is achieved by sandwiching a 6mm vertical wire between rows of twin 8mm horizontal wires spaced at 200mm intervals. This mesh configuration ensures that the panels offer a high resistance to vandalism.
Features:
- Compliant to BS 1722 Pt. 14
- Available from stock
- Base-plated post option from stockM8 Security fixings
- Rigid double wire designChoice of RAL colours available
Suitable for:
- Schools, Colleges & Universities
- Commercial Premises
- Industrial Units
- Theme Parks
Duex® Perimeter Specification
Panels
- Heights: 1230, 1830, 2030, 2430, 3030mm
- Wire Diameter : 6mm verticals & twin 8mm horizontals
- Aperture Size : 200 x 50mm
- Panel Width : 2506mm
POSTS
Post Size : 60 x 60 SHS
Post Centres : 2530mm
FINISH
Galvanised and Polyester Powder Coated to BS 1722 Pt. 16
Duex®panels are supported by strong 60 x 60 steel box section posts, which are supplied with steel fixing clips & M8 security screws. Where a lighter protection is acceptable or budget constraints are tighter Duex® is also available in a 6/5/6mm wire configuration.
"Duex Wave"
$1.00
“Attractive wave design”
This attractive mesh system creates an eye catching wave effect around a desired area. Ideal for play or nursery environments, the flowing design provides a refreshing alternative to standard low height mesh systems and also benefits from a rigid durable double wire configuration. Security fixings and a full length clamp bar secure the mesh to strong box section posts ensuring that looks don’t come at the expense of quality.
Features:
- Compliant to BS 1722 Pt. 14
- M8 Security fixings
- Rigid double wire design
- Choice of RAL colours available
Suitable for:
- Junior Schools & Nurseries
- Play Areas
- Garden and Amenity Areas
PANELS:
- Heights : 1200mm (other available on request)
- Wire Diameter : 6mm verticals & twin 8mm horizontals
- Aperture Size : 200 x 50mm
- Panel width : 2506mm
POSTS:
Post Size : 60 x 60 SHS
Post Centres : 2520mm
FINISH
Galvanised and Polyester Powder Coated to BS 1722 Pt. 16.
"Gridex"
$1.00
“Sharp, strong and stylish”
Mesh systems don’t come any more robust than IAE Gridex™.Forge welded architectural grating panels combine flat vertical and round horizontal steel bars. Available in two configurations, either standard Gridex™ 62 x 132 or Gridextra which has a denser 62 x 66 pattern.
Features:
- Forge welded
- Stepping cleats
- Security fixings
- Two configurations available
- Hot Dip Galvanised to BS EN ISO 1461
- Polyester Powder Coating (optional)
Suitable for:
- Car Parks
- Secure Compounds
- New Build Apartment Block Areas
- Office Blocks
Gridex Specification
PANELS
- Heights : Up to 2400mm in single lift
- Flat bar Vertica : 25 x 3mm
- Round Bar Horizontal : 5mm
- Aperture Size : Gridex™ 62 x 132 / Gridxetra 62 x 66
- Panel Width : 1870mm
POSTS
- Post Size : 102 x 44 RSJ (or box section alternative)
- Post Centres : 2000mm
FINISH
Hot Dip Galvanised to BS EN ISO 1461 (as standard).Additional Polyester Powder Coating to BS 1722 Pt.16 if required.
This highly versatile fence is ideal for a wide range of applications, cladding open areas of buildings that require ventilation such as car parks or simply used as a strong attractive boundary fence. RSJ or box section posts support the panels which are available in a range of heights.
"Architectural Screening"
$1.00
Louvex
Providing privacy and security IAE Louvex® is a strong, stylish and modern architectural screen fencing system. Panels are made from mild steel, forge welded at every intersection in accordance with BS 4592 Part 1. A choice of visibility level is available, either a 100% screen (zero visibility) or 80% screen allowing 20% visibility.
Perforated Screening
Using the very latest technology IAE is able to effortlessly create steel perforated screening systems with their design adapted to suit individual applications. Used across a wide range of sites from the Olympic Park to bin stores and recycling areas IAE have manufactured these screens often working with Architects to create a pattern in keeping with their surroundings.
>Panels are supplied 2 meters< wide and can be stacked in a modular fashion to achieve a range of heights. Panels can also be installed with vertical or horizontal louvres allowing freedom over the aesthetics. If additional security is required, consider IAE Louvex® 'HD'3 mm thick heavy duty corrugated louvres creating a super strong and robust security screen.
RCP Screen - H1 Acoustic Barrier
$1.00
RCP Screen - H1 Acoustic Barrier
IAE H1 and H2 barriers are the perfect alternative to timber, manufactured in the UK from recycled plastic reinforced with recycled fibreglass. Recycled plastic beams are placed horizontally between steel posts to create either an outdoor acoustic barrier or indoor industrial partitioning system.
Features
- Quicker to install than timber
- Maintenance free
- Design life of 40 years
- Consistent acoustic performance
- Highly Durable
- UV Stabilised
- Fire rated class 3
Suitable For
- Acoustic noise barriers
- General screening
- Bin stores
Leiktæki & Sport ehf Austurmörk 19 - 810 Hveragerði sími 8650077 - [email protected]
www.Leiktæki.is
