"Daltex Ocean Grey" 2-5mm
"Daltex Ocean Grey"
DALTEX Ocean Grey 2-5mm is a stunning combination of naturally rounded and angular stone featuring shades of lighter smoky grey set against a background of darker greys and punctuated with jewels of brown and cream throughout.
This stunning resin bound gravel adds real impact to all styles of property and can be used for both contemporary and traditional schemes.
DALTEX Ocean Grey 2-5mm is suitable for resin bound installations of all types including driveways, paths and patios.
Install DALTEX Ocean Grey with UVR Resin
We strongly recommend the use of UVR resin when using DALTEX Ocean Grey - or any other DALTEX dried aggregate. The use of UVR resin as part of a resin bound system provides a range of benefits which improve the appearance and performance of the resin bound installation.
"Daltex Ocean Grey" 1-3mm
DALTEX Ocean Grey 1-3mm is a smaller, naturally rounded and angular dried aggregate with striking shades of grey and gorgeous flecks of gold, brown and cream scattered throughout. It is used to fill voids created by larger gravel to form a smooth, uniformed resin bound finish.
This complimentary resin bound gravel can be mixed with the larger DALTEX Ocean Grey 2-5mm.
DALTEX Ocean Grey 1-3mm is an excellent choice for resin bound installations of all types including driveways, paths and patios.
Install DALTEX Ocean Grey with UVR Resin
We strongly recommend the use of UVR resin when using DALTEX Ocean Grey - or any other DALTEX dried aggregate. The use of UVR resin as part of a resin bound system provides a range of benefits which improve the appearance and performance of the resin bound installation.
"New Daltex Pearl Quartz" 1-3mm
This new Daltex Pearl Quartz 1-3mm is a lighter, brighter, fine European subrounded Quartz gravel containing greys and natural beige colours. A lovely smooth, rounded aggregate used on its own or mixed in with larger grades of gravels to fill any voids.
"New Daltex Pearl Quartz" 2-5mm
This new Daltex Pearl Quartz 2-5mm is a lighter, brighter, fine European sub rounded Quartz gravel containing greys and natural beige colours. A lovely smooth, rounded aggregate used on its own or mixed in with larger grades of gravels to fill any voids. Also available in New Pearl Quartz 1-3mm
"Daltex Winter Quartz" 2-5mm
Daltex Winter Quartz 2-5mm is hard, angular quartz gravel with naturally bright, light colours which include flecks of cream, yellow and grey and is sometimes mixed with the Winter Quartz 1-3mm to give a smooth, warm finish.
Other gravels can be mixed in to increase the character of this mix. This gravel looks especially decorative when mixed with Daltex Golden Quartz, Red or Yellow. Also available as Winter Quartz 1-3mm.
"Daltex Winter Quartz" 1-3mm
Daltex Winter Quartz 1-3mm is a hard, angular quartz gravel with naturally bright, light colours which include flecks of cream, yellow and grey which is sometimes mixed with the Winter Quartz 2-5mm to give a smooth, warm finish.
Other gravels can be mixed in to increase the character of this mix. This gravel looks especially decorative when mixed with Daltex Golden Quartz, Red or Yellow.
"Daltex Sterling Silver" 2-5mm
Stunning new Daltex Sterling Silver 2-5mm - darker than the Daltex Silver with a blue/black fleck.
This is can be used either on its own or often mixed with 1-3mm Sterling Silver and 1-2mm White Dolomite for a speckled granite-like surface. This product is used extensively for pedestrian and urban areas, however, it is not suitable for resin bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Sterling Silver" 1-3mm
Stunning new Daltex Sterling Silver 1-3mm is an angular silver granite grit, used with the Daltex Sterling Silver 2-5mm to fill voids to obtain a tighter, more durable resin bound surface finish. It can also be used with other granite colours to add character and sparkle such as the Daltex Salmon Pink 2-5mm.
The Daltex Sterling Silver is not suitable for Resin Bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Golden Quartz" 2-5mm
Daltex Golden Quartz 2-5mm is our best-selling decorative quartz gravel. Situated midway between brown and yellow, it combines the best of all the brown and yellow gravels and really stands alone as one of the most popular gravels we produce. Semi-rounded, smooth and even in texture.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Golden Quartz" 1-3mm
Daltex Golden Quartz 1-3mm is our best-selling decorative quartz gravel, situated midway between brown and yellow gravel. It combines the best of all the brown and yellow gravels and really stands alone as the most popular gravels we produce. It can be blended with Daltex Golden Quartz 2-5mm to form a semi-rounded, smooth and even texture.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Golden Pea" 1-3mm
Daltex Golden Pea 1-3mm is a smaller rounded grit used to fill voids with any gravel or for use in resin bonded applications.
This 1-3mm aggregate mixes well with any gravel to fill voids created by larger stones. It goes particularly well with Daltex Golden Quartz and is also available in Golden Pea 2-5mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Brittany Bronze" 2-5mm
altex Brittany Bronze 2-5mm is a rounded gravel with chestnut, hazel and almond tones throughout this stunning gravel.
The harmonious colours of this gravel are why it's one of our most popular pea gravels, very decorative and used either on its own or with some 1-3mm Daltex Golden Pea to fill in the voids. This product is used extensively to install resin bound drives, car parks and pathways.
Also Available in 1-3mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Brittany Bronze" 1-3mm
Daltex Brittany Bronze 1-3mm is a finer grade of our Brittany Bronze 2-5mm. A very popular rounded resin bound gravel with a brown chestnut finish. When used on its own it has a nice gravelled look with a smooth texture making it popular for foot traffic and cycle paths. It is also suitable to mix into other grades for a unique blend and a stronger finish.
This gravel is also available in 2-5mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Brittany Bronze" 10mm
Daltex Brittany Bronze 10mm is a chestnut brown rounded gravel, used extensively for treepits, as it provides good drainage and with its colours of mixed buffs and white speckle it makes for an attractive gravel.
This product is NOT suitable for use in resin bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Autumn Quartz" 2-5mm
Daltex Autumn Quartz 2-5mm is a popular warm honey, yellow and cream quartz, durable with semi-rounded particles.
Beautiful, imported quartz with flecks of darker stone for a nice even natural surface with character. It can be mixed with the 1-3mm Autumn Quartz or darker aggregates can be introduced to create a contrast.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Autumn Quartz" 1-3mm
Daltex Autumn Quartz 1-3mm is a finer, smaller grade of subrounded particles of quartz, with tones of cream, yellow and honey. Used to bolster the grading and to fill in the voids in any of the quartz range of mixes for a stronger finish. Also available in Autumn Quartz 2-5mm.
The risk of iron staining with this aggregate is low.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Silver" 2-5mm
Daltex Silver 2-5mm is a very popular silver-grey angular granite with darker flecks giving it a contemporary and clean finish.
This is well used either on its own or often mixed with 1-3mm silver and 1-2mm White Dolomite for a speckled granite-like surface. This product is used extensively for pedestrian and urban areas, however, it is not suitable for resin bonded applications.
Also available in Silver 1-3mm and Silver 10mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Silver" 1-3mm
Daltex Silver 1-3mm is an angular silver granite grit, used with the Daltex Silver 2-5mm to fill voids to obtain a tighter, more durable surface finish. It can also be used with other granite colours to add character and sparkle such as the Daltex Salmon Pink 2-5mm.
The Daltex Silver is not suitable for Resin Bonded applications.
Also available as a 2-5mm and a 10mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Silver" 10mm
Daltex Silver 10mm is silver grey and black granite used mainly for tree pits. This highly decorative and bright gravel goes especially well in all areas, especially with urban paving and landscaping schemes. It is not suitable for use in Resin Bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Silver Granite" 0-1mm
Daltex Silver Granite 0-1mm is a finer grade of silver granite used to fill the voids in between the larger grade aggregates or used to add a sparkle to other mixes.
This aggregate is not suitable for use in Resin Bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Devon Yellow" 2-5mm
Our stunning new alternative to Daltex Yellow. A truly beautiful, highly decorative aggregate in its own right, with tones of gold, creams, and chestnut with flecks of black that highlight the lighter tones perfectly within the mix, giving a truly stunning finish.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Amber Gold" 1-4mm
The Daltex Amber Gold 1-4mm is a smaller grade of pea gravel with yellows and brown colours and a rounded and smooth texture.
Used to fill voids in any of the other larger gravels either the browns or the yellows. This aggregate is also highly effective used on its own for a thinner internal finish or for use in resin bonded surfacing.
This product can contain reactive iron (please see Resin Bound-how its done, for more information).
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Dorset Gold" 2-5mm
Daltex Dorset Gold 2-5mm is a semi-rounded golden gravel, with yellow and honey tones. A golden semi-rounded quartz gravel with a distinctive and bright natural finish, similar to Golden Quartz. A really high-quality stone.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Red" 2-5mm
A versatile red granite chipping; bright and bold.
Daltex Red 2-5mm is often used on its own to create a vibrant surface, however, it can be used as the principal colour with white or black in low percentages added to give contrast. Red can be mixed with any other plain colour such as black, green or white as a 50/50 mix to make totally unique and unusual surfaces.
Red is also often used for borders or pathways. Also available in Red 1-3mm and Red 1-2mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Red" 1-3mm
Daltex Red 1-3mm is a finer grade of our red granite chippings. Used to mix in with the Daltex Red 2-5mm to fill voids and add strength to mixes or to use in Resin Bonded applications.
Also available in Red 1-2mm and Red 2-5mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
Daltex Red Granite 1-2mm
Daltex Red Granite 1-2mm is a very fine grade of Red Granite. Used to seal voids and close up any gaps in a resin bound surface.
Also available in 1-3mm and 2-5mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Green" 2-5mm
Daltex Green 2-5mm is a dark olive green angular granite chipping with subtle grey-green tones.
This beautiful green granite is a strong, hard material that can be used on highways as a finishing grit or on decorative drives. It is sometimes mixed with red or black to create striking mixes.
Also available in Green 1mm, Green 2mm and Green 3mm.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Black" 2-5mm
The Daltex Black 2-5mm is a plain aggregate that can be used on its own or better still with a mix of red or white to add character. It can be used as a slight percentage mix into virtually any other product to produce a strong black fleck that adds texture and contrast. Daltex Black is an angular granite aggregate that creates strong adhesion.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Black" 1-3mm
The Daltex Black 1-3mm is a single colour aggregate that can be used on it's own or better still, mixed with red or white to add character. It can be used as a slight percentage mix into virtually any other product to produce a strong black fleck that adds texture and contrast. Ideal to use as a border to a driveway or patio area, or for adding detail. An angular granite aggregate for strong adhesion.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Staffs Pink" 1-3mm
Daltex Staffordshire Pink 1-3mm is a round to irregular shaped, quartzite crushed gravel, finer than our 2-5mm version. It has tones of lilac, browns, pinks and purples and is used to create a
smoother finish with the 2-5mm aggregate.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Staffs Pink" 2-5mm
Daltex Staffs Pink 2-5mm is a crushed brown, purple and pink angular gravel that looks stunning when used in resin bound applications. Excellent on large areas that need a more subtle finish. It can be mixed with the 1-3mm Staffordshire Pink to tighten the grading or equally well on its own.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Trent Pea" 3-6mm
Daltex Trent Pea 3-6mm is a gorgeous mix of brown, black and chestnut tones. This rounded gravel gives a smooth finish and is excellent to walk on.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Daltex Dobbsweir 3-6mm
Daltex Dobbsweir 3-6mm is a beautiful warm, partially rounded golden gravel with mixed tones.
This attractive gravel can be mixed with Amber Gold 1-4mm for a more compacted finish, however, it is just as effective on its own.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Classic" 2-5mm
This Daltex Classic 2-5mm a gorgeous Red, White and Black calcined flint angular resin bound aggregate.
It can be used on its own or mixed with Classic 1-3mm to create a unique finish.
Daltex Classic is not suitable for resin bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non-UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Daltex Salmon Pink" 2-5mm
Daltex Salmon Pink 2-5mm is a balanced red, grey and pink angular granite that is particularly vibrant and even more distinctive.
It bonds well when used on its own for a lovely looking even finish with lots of colour. It can also be mixed with other resin bound aggregate to create an even more attractive contrast.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Rhinegold" 10mm
A beautiful blend of golden yellows & bronze in this Rhinegold Gravel 10mm, also with hints of white and amber tones. This is a European gravel and nicely rounded, it makes it ideal for tree pitting and to add contrast to smaller graded aggregates.
This product is not suitable for Resin Bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Yellow" 2-5mm
Daltex Yellow 2-5mm is a beautiful golden gravel, warm with mixed tones and partially rounded.
This is one of the top sellers for its mix of bright, warm colours. It can be mixed with Yellow 1-4mm for a more compacted finish, however it is just as effective on its own.
This product can contain reactive iron (please see Resin Bound-how its done, for more information)
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Yellow" 10mm
Daltex Yellow 10mm is a bright rounded yellow gravel. Ideal for tree pits to provide a colourful and decorative finish.
This product can contain reactive iron (please see Resin Bound-how its done, for more information.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Daltex Beige" 2-5mm
Daltex Beige 2-5mm is a beige and cream angular marble perfect for those wanting a lighter finish.
This aggregate can be used on its own or mixed with other colours. It is often used to lift other multicoloured gravels to give a lighter, subtle finish. Daltex Beige is not suitable for resin bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
Daltex Celtic Plum 1-3mm
Celtic Plum 1-3mm is a decorative aggregate with the advantage of having a high 68 PSV gritstone for high strength and for areas where high antiskid is needed. It can be added to other mixes to add a fleck of colour or as a contrast to other colours in the range and is great for creating borders.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Chinese Bauxite" 1-3mm
Chinese Bauxite has cream and off white tones in this high PSV bauxite that is used primarily as an antiskid material as it is highly durable and hard wearing with the added benefit of being highly decorative.
"Daltex White Flint" 2-5mm
Daltex White Flint 2-5mm is a pure white angular calcined flint with flecks of red and black. This creation is very unusual and is great when used in mixes.
This aggregate can be used to create a statement, border or as a feature on its own. It can be used as a base in which to mix other colours such as black, green or red. It can also be used to give contrasting highlights, when added to other much darker aggregates.
This aggregate is not suitable for use in Resin Bonded applications.
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
Non UVR resin darkens and fades over a very short period of time and has a natural tendency to discolour. It should never be used with this aggregate.
"Trugrip 71" - 1-3mm
Trugrip 71 1-3mm is a high 68 PSV gritstone for high strength and for areas where high antiskid is needed. It can be added to other mixes to add a fleck of colour and contrast to other colours in the range.
"Daltex Copper Slag" 1-3mm
We strongly recommend the use of UVR resin with all DALTEX dried aggregates.
"Anti-Slip Crushed Glass"
A fine crushed glass to use to increase the resin bound surfaces anti-slip properties.
Used to scatter on the surface of the resin bound surface to add extra anti-slip. One bag should cover approximately 100sqm.
"Daltex Dolomite Marble" 1-2 mm
Daltex Dolomite Marble 1-2mm is a semi angular white grit that is primarily used as a filler for other mixes. It adds a pure white sparkle to enhance most many of our other aggregates.
Dolomite marble is not suitable for resin bonded applications
"C52 Sand 6.25kg"
C52 sand is a pure silica industrial sand graded 0.2mm to 0.3mm and used in many applications as a fine dry sand. Available in 6.25kg bags to mix in with resin bound formulations to give increased skid resistance. Or 25kg bags for casting over resin bound surfaces before the resin has set fully to give skid resistance to sloping surfaces or heavier wear areas.
Not suitable for use in resin bonded applications.
"Chelford 30 Sand"
Chelford 30 Sand is a pure silica industrial sand used in resin bound applications to fill voids for a stronger finish.
95 Sand
95 sand is a finely graded silica sand that can be used in all resin bound applications, it is not suitable for use in resin bonded applications.
110 Sand
110 sand is a pure silica industrial sand graded 0.1mm to 0.3mm and used in many applications as a fine dry sand. Mixed in with resin bound formulations it gives an increased skid resistance, or for casting over resin bound surfaces before the resin has set fully, which gives a skid resistance to sloping surfaces or heavier wear areas.
It is not suitable to be used in resin bonded applications.
16/30 Sand
16/30 sand is a pure silica industrial sand with endless uses. It’s many applications include use in resin bonding, resin bound and concrete resin flooring.
C52 Sand 25kg
C52 sand is a pure silica industrial sand graded 0.2mm to 0.3mm and used in many applications as a fine dry sand. Available in 6.25kg bags to mix in with resin bound formulations to give increased skid resistance. Or 25kg bags for casting over resin bound surfaces before the resin has set fully to give skid resistance to sloping surfaces or heavier wear areas.
Nor suitable for use in resin bonded applications.
"Manhole Cover"
- Application - Internal drainage
- Locking - Locking screws and sealing gasket.
- Loading - 5 Tonne Gross Plated Weight
- Cover - Recessed
- Material - Galvanised Steel Cover & Polypropylene Frame
- Internal Dimensions
- 600 (L) x 450 (W) x 43.5 (D)
- External Dimensions
- 740 (L) x 590 (W) x 58 (D)
- Clear Opening
- 600 x 450