MOBILE BASKETBALL CONSTRUCTION 125 CM
Product no. 4-11
The mobile basketball construction with an outreach 125 cm. The height adjustment range from 200-260-305 cm, protection covers, rotating wheels, ballasts, back cover made of corrugated aluminium plate. This construction is for an indoor and outdoor use where the stable basketball construction cannot be provided. It is equipped with the smooth height adjustment mechanism in range 200 cm ( storage ), 260 cm ( junior basketball ) and 305 cm ( senior basketball ). To regulate the mechanism the trapeze screw TR 20 mm has to be used. It has additional blockades at each level of height ( 200, 260, 305 cm ).
The construction is equipped with "suitcase" balancer ( 8 pieces of ballasts, each with weight of 30 kg - made of stell flat bar 100x50 mm ), security hook which is being fixed to the ground ( floor cap ).
The front of the construction is protected by polyurethan foam with thickness of 5 cm on the plywood base, all is covered with a washable material called " skaden ". The back cover of the construction is made of corrugated aluminium plate with thickness of 3 mm, the part where the ballast are placed opens. The base of the construction is made of steel profiles 80x40x2 mm, the arm is made of 100x100x3 mm profile, the adjustable outreach is made of galvanized profile 90x90x3 mm 9 the rest of construction is powder painted ). The basketball frame dimensions : 1400x1116 mm. Full basketball dimensions in play position : 3090x1900x3973 mm ( including the backboard 105x180 cm ).The storage dimensions: 2600x1900x3066 mm ( including the backboard 105x180 cm ). The construction is mobile because of wheels: rotating wheel fi 80, polyamide paste, grey polyurethan treadmill, roller bearing and wheel fi 100 with roller bearing. This solution for wheels allows the use of basketball construction on different kinds of sport floors. All kinds of backboards and rings can be fixed to this construction.
Mounting the construction to the ground: Transport in the storage position ( 200 cm ) to the required place, by gripping for the ring tilt the construction your way to allow the wheels freely move the basketball construction. Place the construction in such a way that the back hook is in the axis of ground mounting. By using the key release 4 footers on to the ground ( so it is slightly above the ground ). Next, hook the chain and block the construction with the butterfly nut. Open the back cover, place 8 ballasts ( "suitcases" ) and close it.
Adjusting the height: Untwist the locking winder, take out the safety pin, place the key in the regulating screw. The key allows to adjust the height - 200 cm storage, 260 cm junior and 305 senior. After adjusting the required height, block the winders and put the safety pin back.