FALL PROTECTION fs
Item number: 0756
In the case of large areas protected from the effects of the weather, it makes sense to use the large-format fall protection mat. Therefore, the fall protection mat tested according to EN 1177 is part of the basic equipment of indoor playgrounds or climbing gyms. Under play equipment and in front of a climbing wall, the fall protection mat offers permanent, maintenance-free and easy-care fall protection up to the specified critical fall height.
The inexpensive fall protection mat is also slip-resistant. It feels pleasantly natural and warm and insulates against vibrations and sound. The ratio of resistance to mechanical loads and abrasion to insulation, elasticity and open pores is optimally matched for the use of the panels on normally stressed surfaces.
sizes:
all are 1000x1000 but available in 6 different thicknesses and 16 colours
30mm
40mm
45mm
50mm
65mm
80mm
Info:
The fall protection plaster is the reliable problem solver for using intensively used areas, including those with vehicles, as a safer and attractive play area. Because the fall protection plaster is stable enough to carry cars and light trucks, as well as high heels, but still offers usable fall protection and dampens vibrations and noise. Furthermore
material
The rubber granulate, irregularly shaped rubber particles, is obtained from discarded tires. For the most part, it consists of a high-quality mixture of natural rubber (NR) and synthetically produced styrene-butadiene rubber, or SBR for short. The material properties of the WARCO molded part largely correspond to those of SBR. Granules with an edge length of 1.0 to 3.0 mm produce fine-grained surfaces.