Rubber Tile 500x500- 31 colours
Available in 31 colours (view pictures)
Item number: 0520
With the tried and tested fall protection plate, you do not take any risks on the playground, under play equipment or in front of the climbing wall. The fall protection plate, tested in accordance with EN 1177, provides permanent and maintenance-free protection against fall injuries up to a critical fall height.
The fall protection plate is of course water-permeable, weather-resistant, frost-resistant and slip-resistant. It can be used in buildings as well as in the open air. In the case of unbound subsoil, laying on inexpensive plastic honeycomb grids ensures the long-term stability of the fall protection surface. The ratio of resistance to mechanical loads and abrasion to insulation, elasticity and open pores is optimally matched for the use of the panels on normally stressed surfaces.
Info:
The fall protection plaster is the reliable problem solver for using intensively used areas, including those with vehicles, as a safer and attractive play area. Because the fall protection plaster is stable enough to carry cars and light trucks, as well as high heels, but still offers usable fall protection and dampens vibrations and noise. Furthermore
material
The rubber granulate, irregularly shaped rubber particles, is obtained from discarded tires. For the most part, it consists of a high-quality mixture of natural rubber (NR) and synthetically produced styrene-butadiene rubber, or SBR for short. The material properties of the WARCO molded part largely correspond to those of SBR. Granules with an edge length of 1.0 to 3.0 mm produce fine-grained surfaces.
