- MOBILE BASKETBALL CONSTRUCTION 230 CM Electric powered
MOBILE BASKETBALL CONSTRUCTION 230 CM Electric powered
Product no. B676
The mobile basketball construction was designed and made of frame for the ballast load - steel with dimensions 120x200 cm, two brackets made of closed profile 150x80 cm and thickness 10 and 15 mm, outreach for the backboard with profile 150x100 mm, together with joining elements. The PLAY and REST position is based on electrical hydraulic pump system which is equipped with throng fi 60 mm together with joining elements. The electric drive is equipped with one-phase engine 220 V with power of 0,75 kw.
The wheels enable the transportation by going up and down at the same time depending on the position of the basketball construction (PLAY or REST). The front rotating wheels fi 200 mm, back 85 mm. The construction load: concrete block. Safety: 2 telescopic rams are placed between 2 brackets and require securing in PLAY position by blocking the bracket with the mandrel. To get to the REST position the mandrel must be removed. The backboard frame is made of closed steel profile 50x30 mm, reinforced steel washer with 4 holes for mounting the basketball ring. The frame has a shape of L letter, profile 40x20 mm. Adjustable backboard with dimensions 105x180 cm, holes for mounting the ring 170x170 mm, tempered glass with 14 mm ( 6 mm front and 8 mm back, joined by resin mass ). The backboard lines are 5 cm wide. The backboard cover: polyurethane sponge according to the FIBA regulations. The flexible ring made of rod 20 mm. The ram runs the ring flexibility under the pressure of 100-110 kg. The net for the ring: nylon net with thickness 6 mm. The protection covers: front and side are made of secondarily foamed sponge (panel, multilayered), the front cover is 10 cm thick, side and back 5 cm. All of the covers have pvc material finishing that is fixed to the construction by screws. The bar for adjusting the backboard is made of steel 14 mm thick rod. Stabilization and anchoring: 2 mounting points to the ground, fixing screws M12 together with hooks. The construction of the basketball arm enables to mount the 24 seconds clock. TUV Certificate and FIBA Certyficate Level 2.