Pace clock
Pace clock
- Analogue pace clock for interval training.
- Designed for wall mounting or floor mounting on a stand.
- Available in two sizes.
- One or four hands (propeller hands).
General
Single-sided pace clock suitable for damp environments such as indoor pools etc. The dial face is painted white with black numerals and characters. It has a black minute hand or four hands in red, yellow, blue and green.
Installation
The clock is designed for wall mounting or floor mounting on a stand.
Power supply
There are two alternatives; 230 VAC or battery power:
230 VAC – A transformer connects to 230 VAC to provide the clock with 24 VAC power.
Battery – the pace clock is started by means of a switch. The battery can provide continuous operation of the lane timer for 24 hours.
Power supply: 230 VAC (via transformer 230/24 VAC)
Operating voltage: 24 VAC 24 VDC
Ambient temperature: 0 to +40°C 0 to +40°C
Protection class: IP52 equivalent IP52 equivalent
Weight: 5 kg Ø600 mm 6.5 kg Ø600 mm
10 kg Ø900 mm 11.5 kg Ø900 mm
Weight, floor stand: Approx 1 kg Approx 1 kg
"Analogue indoor clock"
Analogue indoor clock
- ABS plastic housing.
- Matt white dial face.
- Black hour and minute hands.
- Flat protective glass.
General
Analogue indoor clock with ABS plastic housing.
The plastic housing is available with an optional natural aluminum ring. (Available in different depths; see leaflet S9070.)
The dial face is available with black numerals 1-12 (A-dial), black hour marks (H-dial) or an Office version.
The clock is supplied with protective glass as standard, but this may be replaced by acrylic or polycarbonate.
Synchronization
The clock is also available with Impulse, Timecode, NTP, WiFi, KNX or Wireless.
Installation
Single-sided for wall mounting or double-sided with a choice of bracket for wall or ceiling mounting.
Battery-powered
Note! Batteries not included.
Technical data/options and accessories are in Images
"Analogue indoor clock - with seconds"
Analogue indoor clock - with seconds
- ABS plastic housing.
- Matt white dial face.
- Black hour and minute hands, red second hand.
- Flat protective glass.
General
Analogue indoor clock with ABS plastic housing.
The plastic housing is available with an optional natural aluminum ring. (Available in different depths; see leaflet S9070.)
The dial face is available with black numerals 1-12 (A-dial), black hour marks (H-dial) or an Office version.
The clock is supplied with protective glass as standard, but this may be replaced by acrylic or polycarbonate.
Synchronization
The clock is also available with Impulse, Timecode, NTP, WiFi, KNX, Quartz or Wireless.
Installation
Single-sided for wall mounting or double-sided with a choice of bracket for wall or ceiling mounting.
Battery-powered
Note! Batteries not included.
Technical data/Options and accessories are in Images
"Analogue indoor/outdoor clock"
Analogue indoor/outdoor clock
- Housing in painted aluminum.
- Matt white dial face.
- Black hour and minute hands.
- Convex protective glass.
- Internal illumination available as an option.
General
Analogue indoor/outdoor clock with a painted aluminum housing. The GPS clock is designed for outdoor use as the antenna requires a free line-of-sight to the sky.
The dial face is available with black numerals 1-12 (A-dial), or black hour marks (H-dial).
The clock is supplied with acrylic protective glass as standard, but this may be replaced by polycarbonate.
Illumination is available as an option (Requires 230 VAC)
Synchronization
The clock is also available with Impulse, Timecode , NTP, Quartz, GPS or Wireless .
Installation
Single-sided for wall mounting or double-sided with a choice of bracket for wall or ceiling mounting. A bracket for pole mounting is available as an option.
Battery-powered
Note! Batteries not included.
Technical data / options and accessories on Images
"Analogue indoor/outdoor clock - with seconds"
Analogue indoor/outdoor clock - with seconds
- Housing in painted aluminum.
- Matt white dial face.
- Black hour and minute hands, red second hand.
- Convex protective glass.
- Internal illumination available as an option.
General
Analogue indoor/outdoor clock with a painted aluminum housing. The GPS clock is designed for outdoor use as the antenna requires a free line-of-sight to the sky.
The dial face is available with black numerals 1-12 (A-dial), or black hour marks (H-dial).
The clock is supplied with acrylic protective glass as standard, but this may be replaced by polycarbonate.
Illumination is available as an option (requires 230 VAC)
Synchronization
The clock is also available with Impulse, Tidmecode, NTP, or GPS.
Installation
Single-sided for wall mounting or double-sided with a choice of bracket for wall or ceiling mounting. A bracket for pole mounting is available as an option.
Technical data / Options and accessories in Images
"Analogue indoor/outdoor clock LED"
Analogue indoor/outdoor clock LED
- Painted aluminum housing.
- Matt white dial face.
- Black hour and minute hands.
- Flat protective glass.
- Front illumination
General
Analogue indoor/outdoor clock with a painted aluminum housing.
The dial face is available with black numerals 1-12 (A-dial), or black hour marks (H-dial).
The clock comes with polycarbonate protective glass.
With LED illumination. (Requires 230 VAC)
Synchronization
The clock is available with Impulse.
Installation
Single-sided for wall mounting or double-sided with the bracket for wall-mounted or suspended installation. A bracket for pole mounting is available as an option.
Technical data / Options and Accessories in Images.
"Analogue indoor/outdoor clock LED - with seconds"
Analogue indoor/outdoor clock LED - with seconds
- Painted aluminum housing.
- Matt white dial face.
- Black hour and minute hands, red second hand.
- Flat protective glass.
- Front illumination
General
Analogue indoor/outdoor clock with a painted aluminum housing.
The dial face is available with black numerals 1-12 (A-dial), or black hour marks (H-dial).
The clock comes with polycarbonate protective glass.
With LED illumination. (Requires 230 VAC)
Synchronization
The clock is available with Impulse.
Installation
Single-sided for wall mounting or double-sided with the bracket for wall-mounted or suspended installation. A bracket for pole mounting is available as an option.
Technical data / options and Accessories in Images
"Horizon IP65, indoor/outdoor"
Horizon IP65, indoor/outdoor
- Acrylic case and protective cover.
- Stainless steel back.
- Matt white face.
- Black hour and minute hands.
- IP65 rated.
General
Analog indoor/outdoor clock with a gray acrylic case and transparent acrylic protective glass. The back is stainless steel. The clock face is available with black numerals 1-12 (A-face), or black hour symbols (H-face).
Control system
The clock is available with Impulse, Timecode or Marine Timecode (Ø300 only).
Installation
Single-sided for wall mounting or double-sided with a choice of bracket for wall or pendant mounting. A bracket for post mounting is available as an option.
Double-sided installation is only available for Ø600 mm.
Technical data / options and accessories on Images
"Analogue indoor/outdoor clock LED IP65"
Analogue indoor/outdoor clock LED IP65
- Painted aluminum housing.
- Matt white dial face.
- Black hour and minute hands.
- Flat protective glass.
- Front illumination.
- Protection class IP65.
General
Analogue indoor/outdoor clock with a painted aluminum housing.
The dial face is available with black numerals 1-12 (A-dial), or black hour marks (H-dial).
The clock comes with polycarbonate protective glass.
With LED illumination. (Requires 230 VAC)
Synchronization
The clock is available with Impulse.
Installation
Single-sided for wall mounting.
technical data / options in Images
"Tower clock" Sérsmíðað/Original
Tower clock
- For dial faces max Ø4000 mm.
- Characters and hands available with illumination.
- Powered by heavy duty movement LMV/GMV.
- Controlled by Master clock.
General
Tower clocks for schools, public buildings, advertising clocks and similar.
Powered by a heavy duty movement type LMV (max Ø2000 mm) or GMV (max Ø4000 mm). A GMV Neon movement is required for illuminated hands.
Available with standard version dial face numerals and hands, but can be modified to suit the customer’s requirements and needs.
Synchronization
The clock is only available with Impulse.
Installation
Characters and hands are fitted directly on the facade.
Contact seller for more Information
Instrument clock, indoor
Instrument clock, indoor
- Black housing.
- Matt white dial face.
- Black hour and minute hands; red second hand as an option.
- Flat protective glass.
- Internal illumination.
General
Analogue instrument clock with a black housing; designed for marine installations. Dial face with hour marks and hand in black. Red sweeping second hand available as an option.
Synchronization
The clock is available with Marine Timecode .
Installation
For recessed mounting in a console/panel or a wall.
Variants and Technical data in Images
"Double clock, indoor"
Double clock, indoor
- Aluminum housing.
- Matt white dial face.
- Black hour and minute hands; red second hand (UTC).
- Acrylic protective glass.
General
Analogue instrument clock with a housing in naturally oxidized aluminum designed for Marine installations. The clock has 2 faces with numerals that show both UTC and local time. With black hour and minute hands and a red second hand (only on UTC).
Synchronization
The clock is available with Marine Timecode .
Installation
For recessed mounting in a console/panel or a wall.
Variants and Technical data on Images